PRO-VAC 550-Y-30
RELEASE FILM
High temperature release film
Amid temperature range, highly flexible polypropylene based release film.
It is suitable for use with epoxy prepreg up to 150°C and may be used in resin infusion applications with a wide range of resin systems however we recommend small scale trials prior to committing to large infusion mouldings.
The film is available yellow in colour with with P31 (approx 6 holes per cm2) for vacuum infusion and standard P3 Perforation pattern for hand lamination and pre preg.
The perforations are hot needled to ensure even resin saturation is achieved throughout the laminate. + Also available in other thickness
Technical data
| Part number | PV550-Y-30 | ||
|---|---|---|---|
| Density | 0.89-0.91 | g/cm3 | ASTM D1505/ ISO/R 1183 |
| Thickness | 30 +/- 10% | μ | ISO 4593 |
| Width | 1500 nominal -0+2% | mm | |
| Length | 250 | m | |
| Tensile strength at break | MD 60 +/- 10% | ||
| TD 35 +/- 10% | N/mm2 | ASTM D882 | |
| Elongation at break | MD 480 +/- 10% | ||
| TD 780 +/- 10% | % | ASTM D882 | |
| Max use temperature | 153 | °C | ISO 306 |
Packaging and storage
Film is supplied in strong bubble plastic
Store in original packaging.